In the process of stamping production, the selection of stamping equipment is very important, because it directly affects the production efficiency, production layout and production safety of the stamping plant; therefore, we should reasonably select the stamping equipment, which should be considered from several aspects, mainly to ensure the production efficiency, safe service life and convenient operation, etc;

In terms of current equipment, stamping automation production equipment is characterized by high production efficiency, small floor area, safe operation, few operators, short production cycle and high quality of stamping parts, which is a better processing method;

Especially with the use of large tonnage multi position automatic press, compared with the traditional workshop stamping line, its floor area can be reduced by half, and its productivity can also be increased by 50%. It not only improves the production efficiency of stamping parts, but also improves the surface quality of stamping parts and reduces the labor force;

At present, most of the domestic stamping production lines use a double acting press and 4-6 single acting presses to form a stamping assembly line. Manual loading and unloading completes the production of large-scale stamping parts, with low production efficiency. In the process of manual loading and unloading and workpiece transmission, it is easy to cause defects such as scratches on the workpiece, covering a large area and high labor cost. The large-scale multi position automatic press can not only automatically It is 4-5 times of the manual feeding line and 2-3 times of the single line automatic production line.